How To Setup Outlook 2013 In Your Computer?

Outlook 2013 program makes use of the clean Windows 8 look. This makes your inbox look less cluttered and displays all the necessary information on the computer screen. This gives much space for the tools that let you work right where you are. You can reply to an email message with the help of the button at the top of the message. This will let you type in the main Outlook window that is above the message you were reading. If you want, you can pop it out into a different window but the previous one is the neat way of working.
The Outlook setting procedure to set up the Outlook 2013 program in your computer is explained below. You may also refer to the Outlook help modules published in the Microsoft web site for further assistance.

Instructions

• Turn on your PC and open the Outlook program. From the Outlook window, select the File menu.
• Click on the Add Account option.
• Select Manual setup or Additional server types and select the Next button.
• From the next window, select IMAP or POP and click on the Next button again.
• Type in your First Name and Email address. After that, select IMAP as your account type. For the Outgoing mail server (SMTP), type in send.one.com and for the Incoming mail server (IMAP), type imap.one.com. In the Logon Information section, enter the e-mail address and the password that you have created in the Control Panel. Now, click on the More Settings option.
• Click on Outgoing Server and check the box next to My outgoing server (SMTP) requires authentication. 
• Select the Advanced tab. For the Incoming server (IMAP), type 993 and click SSL. For the Outgoing server (SMTP), type 465 and click SSL. Click on the OK button and then on the Next button.
• After doing the above steps, click on the Close button to close all the open windows.
• Click on the Finish button to finish the procedure.

You have now successfully setup the Microsoft Outlook 2013 account. These are the Outlook setting steps to setup the Outlook program in your computer. If you have any more doubts, you can contact our support team for further clarification on the steps. The tech support executive will help you to clear your doubts and complete the procedure successfully.

Removing SweetIM Toolbar From Your System

The SweetIM toolbar is a browser add-on program available for IE and Firefox web browsers. The toolbar allows the users to use emoticons and animations in the email messages, blogs and web pages to increase their visibility. Follow the simple instructions given below for removing the toolbar from your system.

Instructions To Remove From IE

• Click on the Start button located at the left corner of the taskbar for opening the Start menu and then click on the Control Panel option found next to it. 
• Now, when the Control Panel window opens, look for the option named Add or Remove Programs and click on it to view all the installed programs in your system.
• Look for the option named Macromedia SweetIM in the list of programs shown in the window by scrolling down and then select it when found.
• In the top of the page, you will be able to see a button named Remove, click on the button for starting the Macromedia SweetIM removal process.
• Now the installation wizard will remove the toolbar from your system. You don’t need to worry about how to remove a toolbar anymore as the same procedure can be done for removing all toolbars.

Instructions To Remove From Firefox

• Open the Firefox web browser by double clicking on its shortcut icon present in the desktop and then click on the Tools menu found at the top of the browser window in the menu bar.
• Now you can see an option named Add-ons in the drop down menu, click on it to view all the add-ons installed in the Firefox browser. 
• When the Add-ons dialog box appears, showing all the installed add-ons in the Firefox web browser, look for the add-on named SweetIM for Firefox by scrolling down through the list and then select it when found. Now click on the un-install button found at the top of the dialog box for removing the SweetIM for Firefox toolbar from the Firefox web browser.
• If the system asks you to enter the administrative password, then enter it to continue the toolbar removal process.

Hope that the above article educated you on how to remove a toolbar installed in your system. If you are not able to uninstall the toolbar by following the above instructions, then feel free to contact the Microsoft support team.

The Preview Version Of Windows 8.1

Microsoft has recently released the Windows 8.1 preview version. The preview version will depict an idea on what the final Windows 8.1 will be. The Windows 8.1 is the update to the Windows 8 operating system. By following the below provided how to upgrade to Windows 8 latest update, the Windows 8.1 instructions, the Windows 8.1 preview version can be easily installed on your system without much difficulty.

Instructions

• Double click on the Windows 8.1 preview ISO file that you have downloaded in order to open it.
• The Windows 8.1 file will mount automatically and you will be able to view the different files that are available. The setup.exe file will be present, and you need to access it in order to start the installation procedure.
• The installation process will be initiated by the Windows 8.1 installer.
• Windows 8.1 contains a product key, and you will be asked to enter the product key.
• After checking, the product key entered is correct, click on the Next button that is present.
• The license terms will be shown. You have to read the license terms, and agree to it by selecting the I Accept The Terms. Now in order to continue click on the Accept button.
• Now tap the Select option, and the installer will check if the system is ready to install Windows 8.1.
• If the system is ready to install a Read To Install will appear generated by the installer. In addition, what happens during the installation process will be displayed.
• Now choose the Install option.
• The PC will restart when the installation procedure has reached 100 percent and the betta fish boot screen of the Windows 8.1 will be visible.
• The drivers and the necessary files will be configured and installed by Windows. A few more restarts of the system will take place and a stage will reach where the coloring of Windows, Wifi settings and other privacy settings will have to be chosen.
• When all the necessary settings and changes have been made, the PC will be fully configured and the start screen of Windows 8.1 will appear.
• Now your system will be running the Windows 8.1 preview version.

By following these instructions on how to upgrade to Windows 8 latest update, the Windows 8.1 preview version, you will have a swell time using the preview version of Windows 8.1.

Configuring Incoming And Outgoing Server Settings In Outlook 2013

You can configure the Microsoft Outlook 2013 program to access your email account with ease. It is the latest version of the Outlook email manager program released by Microsoft. Follow the simple Outlook setting instructions given below for configuring server settings in Outlook 2013 for accessing your email.

Instructions

• Open the Outlook 2013 application by clicking on its icon found in the Microsoft Office folder in the Start menu. 
• If you are opening Outlook for the first time, it will ask you to setup a new account. 
• If the system does not ask you to add a new account, you can add an account by clicking on the Add Account option found under the File menu. 
• Now to configure the server settings, click on Manual setup or additional server types option found at the bottom of the window and then click on the Next button. 
• Now choose the type of account as POP or IMAP and then click on the Next button.
• Now enter your name and the email address in the field provided in the page and make sure to select the type of email as IMAP. 
• Now set the incoming and outgoing server addresses as mail.messagingengine.com and ensure that the User Name field contains your complete username. 
• To change other values related to incoming and outgoing servers, click on the More Settings button and then on the Outgoing Server tab. 
• Now put a check mark on the checkbox found beside the option My outgoing server (SMTP) requires authentication and then click on the Advanced tab. 
• Set both the incoming and outgoing servers to use SSL encryption for sending and receiving emails. 
• Set the Incoming port number as 993, the Outgoing port number as 465 and set the Root folder path as Inbox. 
• Press on the OK button when you are done configuring the server settings. 
• The Outlook 2013 application will now perform a connection check operation for checking if the Outlook setting you have entered is right. When the test is completed, close the window and then click on the Next button and then on the Finish button to complete the process.

Your account and its server settings have been successfully configured now. If you have any doubts regarding the instructions given above, feel free to contact our Outlook support team.

Resetting Wireless Adapter In Windows 7

One uses Wireless adapters for connecting to the internet or personal network wirelessly. If you experience problems while trying to connect to the internet, then it may be because the wireless adapter is disabled. You will need to enable the wireless adapter for accessing the internet and the Windows 7 help instructions for enabling the wireless adapter are given below.

Sometimes the connection error may be due to some errors in the network adapter’s software or hardware. This can be easily fixed by resetting the adapter. You can fix the problems like slow and limited connectivity and connection failure issues by resetting the wireless network adapter in the Windows 7 computer. Follow the simple instructions given below for resetting a wireless network router in a computer running Windows 7 operating system.

Instructions 

• Go to the left corner of the taskbar and click on the Start button to open the Start menu. 
• Look for the option named Control Panel in the right side pane of the Start menu and click on it. 
• Now locate the Control Panel search box and type in adapter into the box and then press the Enter button to begin the search process. Now select the View Network Connections option from the search results shown and then click on the Network and Sharing Center option. 
• Now a new window will open, look for the icon of the wireless adapter that you use in that window. 
• Now right click on the icon and then select the option named Disable from the drop down menu. If the system prompts, you need to enter the administrator password. 
• Now the wireless adapter is disabled. Right click on the icon again and now you will be able to see an option named as Enable. If the system asks for the administrator password, provide it and confirm the action. 
• Now open a web browser by double clicking on its icon and try to load a web page in the browser. 

If you are able to view the page details, then you have successfully reset the wireless adapter. If you follow the simple instructions given above, then you can easily reset a wireless network adapter in Windows 7 computer. If you are having any troubles while resetting the device, contact the Windows 7 help and support team for further support.